Eliminator Lighting Mini Par Bar

The Eliminator Lighting Mini Par Bar is a complete, portable lighting system for DJs, bands, and small events. Four LED par fixtures mounted on a linear bar, a tripod stand, a wireless remote, and a carry bag come together in one package, so you can add colorful, professional stage lighting to any show in minutes.

Highlights

• Four LED par fixtures on a linear bar, each with twelve 1-watt RGBW LEDs
• Red, green, blue, and white LEDs for vivid colors and clean whites
• Individually adjustable fixtures for precise aiming
• Sound-active, auto, DMX, and primary/secondary linking modes
• Includes lighting tripod stand, IR wireless remote, and transport bag
• Can stand on the floor as uplighting or mount on truss

Eliminator Mini Par Bar: Instant Stage Lighting

Lighting makes any performance look more professional, but many entertainers don’t have time to set up individual fixtures and controllers. The Mini Par Bar solves that with an all-in-one design: set up the included tripod, mount the bar, plug in one power cable, and you have four color-mixing lights ready to go. Each fixture tilts independently, so you can wash a stage, highlight a performer, or splash color on a backdrop.

RGBW LEDs add a dedicated white to the usual red, green, and blue, giving you cleaner whites and softer pastel colors in addition to saturated show colors.

Mini Par Bar Control Options

The Mini Par Bar adapts to your skill level and setup. In sound-active mode, the lights change color and pattern with the beat of the music, perfect for DJs and parties. Auto mode runs built-in programs with no input required. The IR wireless remote lets you change colors and modes from across the room, and the 8-channel DMX mode allows full control from a DMX lighting controller or software. Link multiple units in primary/secondary mode for synchronized shows.

Setting Up the Mini Par Bar

Place the tripod at the side or front of the stage and raise the bar above the performers’ heads, angling the fixtures down toward the stage. For two units, place one on each side of the stage and cross the beams for even coverage. For uplighting, remove the bar from the tripod and set it on the floor in front of a wall or backdrop. Keep the tripod legs fully spread and away from foot traffic for stability.

Eliminator Mini Par Bar FAQ

Do I need a DMX controller to use the Mini Par Bar? No. The built-in sound-active and auto modes, plus the included wireless remote, let you run a great light show without any additional equipment. DMX is available when you want more control.

Can I link two Mini Par Bars together? Yes. Use primary/secondary mode with a DMX cable between units to synchronize them, or control both from a DMX controller.

Eliminator Mini Par Bar Specifications at a Glance

• Fixtures: 4 LED pars on a linear bar
• LEDs per fixture: 12 x 1 W RGBW (3 each red, green, blue, white)
• Beam angle: 25 degrees
• Control: sound-active, auto, 8-channel DMX, IR remote, primary/secondary
• DMX connectors: 3-pin in/out
• Power: 100-240 V AC, 80 W maximum
• Included: tripod stand, IR wireless remote, transport bag, IEC power cable

Who Buys the Eliminator Mini Par Bar

• Mobile DJs and party entertainers
• Bands and solo performers playing bars and small venues
• Churches and schools adding lighting to events and stages
• Event planners who need simple, portable uplighting

Why Buy the Eliminator Mini Par Bar From Metro Sound & Lighting

Metro Sound & Lighting isn’t a catalog-only retailer. We sell, install, and service lighting and audio gear in-house, so our team can help you build a lighting package around the Mini Par Bar, add DMX control or more fixtures as you grow, and support your gear after the sale. We design lighting systems for churches, schools, and venues and offer B2B and integrator pricing on volume orders.

Browse more options in our Lighting Systems category, or see the full specifications on the official Eliminator Mini Par Bar product page.